+- TDS Sim Software Forums (https://www.tdssim.com/forum)
+-- Forum: TDS Sim Software (https://www.tdssim.com/forum/forum-1.html)
+--- Forum: TDS GTNXi XPlane (https://www.tdssim.com/forum/forum-3.html)
+--- Thread: TorqueSim BN-2B wrong power bus (/thread-1703.html)
TorqueSim BN-2B wrong power bus - mroushdy - 02-04-2026
Hi,
I'm not sure whether this question should be for you or the aircraft's developer. but let's see. the modules on the mentioned aircraft powers on once I turn on the battery, which isn't correct, it should power on with the Avionics bus, adn this is causing a conflict with the X-chatter app (not the main issue I know), so, the elecPower.Source is set to 4 in the ini file, and I've tried a couple of other values, assuming that they were right and the modules should only work if the Avionics switch is turned on, but I had no luck, so I've had to rollback my change. Any thoughts here pelase?
RE: TorqueSim BN-2B wrong power bus - adminOwner2 - 02-04-2026
Hello,
You can utilize the X-Plane Plugins menu, TDS GTNXi Settings for each GTNXi unit, so you can switch the power source to the avionics bus, then the setting will be saved in the TDSGTN.ini file (located in the aircraft folder) for subsequent startups.
Avionics Bus should be a value of 2 (at the time of writing)
RE: TorqueSim BN-2B wrong power bus - mroushdy - 02-04-2026
(02-04-2026, 08:25 AM)adminOwner2 Wrote: Hello,
You can utilize the X-Plane Plugins menu, TDS GTNXi Settings for each GTNXi unit, so you can switch the power source to the avionics bus, then the setting will be saved in the TDSGTN.ini file (located in the aircraft folder) for subsequent startups.
Avionics Bus should be a value of 2 (at the time of writing)
Hi, I've already tried the value "2", with no effect, and also changed the setting in the settings page (before opening this case), but no luck, still sticks to the main bus. What would you recommend here please?
RE: TorqueSim BN-2B wrong power bus - adminOwner2 - 02-04-2026
Does the Avionics Bus setting work in other aircraft?
If this is the case, then perhaps this is an aircraft configuration issue?
RE: TorqueSim BN-2B wrong power bus - mroushdy - 02-04-2026
(02-04-2026, 03:02 PM)adminOwner2 Wrote: Does the Avionics Bus setting work in other aircraft?
If this is the case, then perhaps this is an aircraft configuration issue?
Never encountered such an issue, perhaps I should open a ticket with these guys. Thanks!
RE: TorqueSim BN-2B wrong power bus - adminOwner2 - 02-05-2026
Hello,
If the Avionics Bus setting in the TDS GTNXi works with other aircraft, then we would recommend discussing this with the aircraft add-on developer, as a fix can not come from the TDS side, but from the aircraft side.