Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flight Plan Corruption
#1
Hi,

Yesterday I flew the RNAV GPS (Z) RW32 at KSBS, recreating an accident flight that was a recent topic of discussion.

The approach and transition loaded fine, and I proceeded to fly.

Everything went fine initially, and I started down after the FAF in coupled AP (LNAV+V).

Having experienced the exact situation the accident flight had, I disconnected the AP and made a terrain avoidance maneuver.

I flew the rest of the approach by hand, and landed.

Upon passing the MAP, the GTN correctly detected this and asked me what to do, presenting two options. I ignored it and landed.

After stopping on the runway, I pressed the button to UNSUSP the approach. At this moment, the GTN froze, then started to stutter badly and run very slowly. All screen inputs were delayed by 5 seconds.

I tried to clear the flight plan but this just resulted in the waypoint names being deleted. I still had a flightplan but it was full of dashes (--------) for all data.

Unable to do anything with it, I ended up quitting the sim and restarting.

SEPERATE QUESTION: does the GTN drive the glideslope indicator?
Reply


Messages In This Thread
Flight Plan Corruption - by EGT - 02-18-2026, 05:02 PM
RE: Flight Plan Corruption - by adminOwner2 - 02-19-2026, 09:27 AM
RE: Flight Plan Corruption - by EGT - 02-20-2026, 07:00 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)